Supports customization with a processing capacity of up to 15900 CFM (cubic feet per minute).
Good treatment effect: equipped with an independent water distribution system and it is a multiple upgraded version, the water distribution efficiency is guaranteed;
Wide application conditions: hydrophilic aluminum foil is used, and the whole series is equipped with heat exchangers and pre-coolers as standard, which can better adapt to harsh working conditions
Wide application conditions: hydrophilic aluminum foil is used, and the whole series is equipped with heat exchangers and pre-coolers as standard, which can better adapt to harsh working conditions
Customized according to needs: color can be customized, PLC is optional, dry contacts, Modbus communication, Internet of Things communication, etc. can be customized according to customer needs
The PD Series Plate Heat Exchanger Refrigerated Air Dryer is developed on the basis of conventional shell-and-tube refrigerated air dryers and features an innovative 3-in-1 aluminum alloy plate heat exchanger that integrates the evaporator, air-to-air heat exchanger, and water separator into a single compact unit.
Compared with conventional shell-and-tube heat exchange systems, the aluminum alloy plate heat exchanger provides higher heat transfer efficiency. The temperature difference between the dryer inlet and outlet is maintained within 10°C, delivering a stable pressure dew point while achieving greater energy efficiency.
To ensure stable drying performance and reliable long-term operation, the Shell Tube Refrigerated Air Dryer should be used under the following recommended conditions:
For the best operating result, the dryer should be installed in a clean and well-ventilated environment. Stable inlet conditions and proper system configuration help maintain drying efficiency, reduce pressure loss, and extend equipment service life.
| Model | Capacity (m³/min) | Power Supply (V/Hz/Ph) | Motor Power (kW) | Air Inlet / Outlet | Net Weight (kg) | Dimensions (L × W × H, mm) |
|---|---|---|---|---|---|---|
| LY-PD10A | 1.60 | 220/50/1 | 0.70 | RC1″ | 160 | 500 × 360 × 750 |
| LY-PD20A | 2.60 | 220/50/1 | 0.79 | RC1″ | 225 | 500 × 380 × 750 |
| LY-PD30A | 3.80 | 220/50/1 | 0.90 | RC1-1/4″ | 235 | 520 × 450 × 920 |
| LY-PD50A | 6.50 | 220/50/1 | 1.20 | RC1-1/2″ | 295 | 670 × 560 × 1060 |
| LY-PD75A | 10.50 | 220/50/1 | 2.00 | RC2″ | 345 | 670 × 560 × 1060 |
| LY-PD100A | 13.50 | 220/50/1 | 2.22 | RC2″ | 430 | 1010 × 760 × 1480 |
| LY-PD120A | 17.00 | 380/50/3 | 2.80 | RC2-1/2″ | 450 | 1200 × 700 × 1480 |
| LY-PD150A | 21.50 | 380/50/3 | 3.90 | DN80 | 550 | 1460 × 700 × 1480 |
| LY-PD180A | 25.00 | 380/50/3 | 4.90 | DN80 | 630 | 1460 × 740 × 1600 |
| LY-PD200A | 28.50 | 380/50/3 | 5.40 | DN80 | 680 | 1480 × 740 × 1600 |
| LY-PD250A | 32.50 | 380/50/3 | 6.50 | DN80 | 800 | 1480 × 740 × 1460 |
| LY-PD300A | 37.00 | 380/50/3 | 7.80 | DN100 | 1000 | 1640 × 840 × 1750 |
| LY-PD400A | 45.00 | 380/50/3 | 8.80 | DN100 | 1150 | 1640 × 840 × 1750 |
| LY-PD500A | 55.00 | 380/50/3 | 10.10 | DN125 | 1400 | 1740 × 840 × 1750 |
| LY-PD600A | 75.00 | 380/50/3 | 10.10 | DN125 | 1500 | 1890 × 840 × 1863 |
| LY-PD700A | 75.00 | 380/50/3 | 11.10 | DN125 | 1750 | 1890 × 950 × 2010 |
| LY-PD800A | 85.00 | 380/50/3 | 13.70 | DN125 | 1950 | 2220 × 950 × 2063 |
| Model | Capacity (m³/min) | Power Supply (V/Hz/Ph) | Motor Power (kW) | Air Inlet / Outlet | Net Weight (kg) | Dimensions (L × W × H, mm) |
|---|---|---|---|---|---|---|
| LY-PD150W | 21.5 | 380/50/3 | 2.8 | DN80 | 1380 | 740 × 1430 × 1430 |
| LY-PD160W | 25.0 | 380/50/3 | 3.6 | DN80 | 1380 | 740 × 1430 × 1430 |
| LY-PD200W | 28.0 | 380/50/3 | 3.8 | DN80 | 1380 | 740 × 1540 × 1540 |
| LY-PD250W | 32.0 | 380/50/3 | 4.2 | DN80 | 1480 | 740 × 1540 × 1540 |
| LY-PD300W | 37.0 | 380/50/3 | 6.0 | DN100 | 1590 | 740 × 1550 × 1550 |
| LY-PD400W | 45.0 | 380/50/3 | 6.6 | DN100 | 1590 | 840 × 1700 × 1550 |
| LY-PD600W | 65.0 | 380/50/3 | 7.6 | DN125 | 1890 | 840 × 1753 × 1753 |
| LY-PD800W | 75.0 | 380/50/3 | 8.5 | DN125 | 2090 | 840 × 1753 × 1753 |
| LY-PD850W | 85.0 | 380/50/3 | 10.2 | DN125 | 2280 | 840 × 1763 × 1753 |
| LY-PD900W | 95.0 | 380/50/3 | 11.3 | DN150 | 2280 | 940 × 1763 × 1763 |
| LY-PD1100W | 110.0 | 380/50/3 | 12.9 | DN150 | 2680 | 940 × 1763 × 1863 |
| LY-PD1200W | 120.0 | 380/50/3 | 14.7 | DN150 | 2880 | 960 × 1763 × 1863 |
| LY-PD1400W | 140.0 | 380/50/3 | 14.7 | DN200 | 2000 | 1350 × 1863 × 1863 |
| LY-PD1600W | 165.0 | 380/50/3 | 16.9 | DN200 | 2200 | 1350 × 1863 × 1863 |
Note: For air volume above 110 m³/min, or for special requirements related to specifications, materials, or temperature, please contact our company or dealer for technical support. The above data is for reference only and may change without prior notice.
Low Energy Consumption:The 3-in-1 plate heat exchanger design reduces overall energy consumption by approximately 20–30%.
Low Pressure Drop:The total pressure drop is less than 0.015 MPa, exceeding the requirements of applicable national standards.
Environmentally Friendly & Durable:The entire series uses environmentally friendly refrigerants R410A/R407C and is designed to meet international environmental requirements. Maximum working pressure is up to 1.6 MPa.
Low Dew Point:Under standard operating conditions, the pressure dew point can reach 2–10°C. An electronic bypass valve helps ensure stable system operation.
High Stability:An enlarged condenser design enhances overall system stability and enables reliable operation at higher inlet and ambient temperatures.
Intelligent Control:Equipped with an intelligent controller for fully automatic operation, temperature display, and a standard RS-485 communication interface.
Upgraded Appearance:A newly designed enclosure and panel structure provides a cleaner, more refined appearance.
High-Quality Compressed Air:The heat exchange system is constructed from aluminum alloy and/or stainless steel, preventing rust, debris, and secondary contamination of compressed air. This makes the dryer particularly suitable for applications in the pharmaceutical and food industries.
– As an air treatment and gas purification manufacturer, we can meet all your compressed air quality and industrial gas needs. This includes various filtering equipment and customized air quality services.
– Our company is always ready to provide explanations. Just share your air quality requirements and we can develop the best system for you.
Need help navigating our compressed air dryer offer? We are always ready to put together the solution that best meets your needs.
Compact Capacity Range – Choose from 25, 35, or 50 CFM to match your compressor flow.
Air-Cooled Design – No water connection required; perfect for facilities without cooling water.
Stable Dew Point Control – Maintains 2–10°C (35.6–50°F) dew point for consistent dryness.
Energy Efficient – Equipped with low-power refrigeration systems for cost savings.
Automatic Drain Valve – Discharges moisture automatically.
Plug-and-Play Setup – Quick installation and operation in limited spaces.
Durable Construction – Built with powder-coated steel and corrosion-resistant components.
Capacity: Precisely rated for 100 CFM, ensuring optimal moisture removal for consistent compressed air quality.
Air Cooled Design: No need for water cooling infrastructure — plug and play installation.
Energy Efficient: Incorporates a high-efficiency refrigeration compressor and heat exchanger to reduce power consumption.
Compact & Durable: Space-saving footprint with a heavy-duty steel casing for long-term durability.
Low Dew Point: Delivers a stable pressure dew point as low as 2–10°C (35.6–50°F).
Automatic Drain Valve: Prevents liquid buildup and minimizes maintenance time.
Simple Controls: User-friendly interface with operating indicators and safety alarms.
The air is pure, no secondary pollution, integrated skid-mounted design, compact structure, stable dew point, remarkable water removal effect.
Stainless steel plate heat exchanger with high heat exchange efficiency and compact structure.
Independent stainless steel steam-water separator with high water separation efficiency, timely separates condensed water and other impurities from compressed air and discharges them out of the machine.
The whole machine is made of stainless steel or aluminum alloy, which will not rust and prevent secondary contamination of compressed air.
Single chip intelligent control, real-time display of evaporation temperature, including over-temperature alarm, electrical fault, high pressure alarm, low pressure alarm and other functions.
The compressed air first enters the pre-cooler for initial cooling, and then passes through the pre-cooling/reheating section of the high-performance 3-in-1 plate heat exchanger for further cooling. It subsequently enters the evaporator section, where it is rapidly cooled and the condensed moisture is separated.The treated low-temperature compressed air then returns to the pre-cooling/reheating heat exchanger, where it exchanges heat with the incoming hot compressed air. This reheats the dry compressed air before it is discharged from the dryer.The refrigeration system precisely adjusts the compressor speed according to changes in system load. The operating frequency is automatically regulated to match the actual air treatment demand, ensuring stable and energy-efficient operation.
No. 22-1 to 22-3, Jinzhu Road, Heting Town, Heshan City, Jiangmen City, Guangdong Province
(WeChat/WhatsApp)：+8615756650906
№1：(WeChat/WhatsApp)：+8618628146428
№2：(WeChat/WhatsApp)：+8613823294942
